Latest MediaMVP-HD application

Installation instructions

MediaMVP-HD application version 201006251718

• Download this file
• Unzip this file to a directory you will remember. There are two files: a small file called MVPHD.MD5 and a larger file called MVPHD
• Copy these two files to the ROOT directory of a USB thumb drive
• Plug the USB thumb drive into the USB port on the front of MediaMVP-HD. Wait a few seconds for the thumb drive to be recognized
• From the Main menu on MediaMVP-HD, go to Setup / System / Advanced setup
• click on Upgrade and then click Yes
• You will see the progress bar move across the screen as the application is updated
• When the update is complete, MediaMVP-HD will automatically reboot

Release notes:
1. SAMBA mount in read-only mode
2. [Back] crash fixed
3. HDMI corruption during test mode fixed
4. Background is disabled in screen saver mode

Note: if the progress bar is "stuck" at the beginning with either no red bars or if it stops at three red bars, it means that MediaMVP-HD cannot read the necessary files from your USB drive. There are several reasons why this might happen: you might not have left the USB thumb drive long enough in MediaMVP-HD for it to be recognized; the files might not have been correctly unpacked or copied to the USB thumb drive; or your USB thumb drive might have a bad section and the bad section is preventing the new application from being read properly.

If this happens, try to reload the USB thumb drive with the MediaMVP-HD application and it this still does not work, use a different USB thumb drive.

Date: June 25, 2010
Version: mvp-hd_201006251718.zip

MediaMVP-HD Setup Wizard

This application will help the MediaMVP-HD set up shared folders which are on your PC.

The MediaMVP-HD Setup Wizard is run on your PC. It searches your PCs hard drive for digital media and then lists the folders where digital media is found. You can then choose which folders you would like to share with the MediaMVP-HD, and the Wizard communicates with MediaMVP-HD over your Ethernet LAN and makes the necessary settings so that the MediaMVP-HD will "see" these shared folders.

To install, download this file, and then unpack it to your PC. Then run it.

MediaMVP-HD setup Wizard

Beta software

None at this time.

3rd Party Applications

 

MediaMVP-HD Install Guide

MediaMVP-HD Install guide

Frequently Asked Questions

Issues with .MKV file playbacks

When connected HDMI and changing sources on my TV set, I sometimes get a “no signal” message and must reset the power on the Media MVP HD to regain the picture?

---

Issues with .MKV file playbacks

If you are experiencing problems with .MKV files playing back smoothly, stopping, the status bar remaining on the screen, or other playback related problems with this file format, this is currently a known problem and a driver update will address this in the near future. The latest drivers for the Media MVP HD can be found here:
http://www.hauppauge.com/site/support/support_mediamvp-hd.html

When connected HDMI and changing sources on my TV set, I sometimes get a “no signal” message and must reset the power on the Media MVP HD to regain the picture?

Switching sources on some TV sets may disrupt the Media MVP HD stream and result in this problem. Simply turning the power on and off using the MVP’s remote control will reset the signal.

Frequently asked questions about developing a custom application for MediaMVP-HD

MediaMVP-HD is Linux "box" where new applications can be added. Hauppauge has provided a variety of mechanisms by which the product can be extended by hobbyists and commercial parties looking to do customization.

Click here for the Developer FAQ

.